
Filled fastcast resins are especially suitable for making e.g. master, core models, negatives and patterns with large dimensions and are characterized by low shrinkage.

The unfilled fastcast resins are usually used for making detailed models and mouldings with thin walls due to their excellent flowability. They can, however, be casted in thicker layers by adding filling materials to them.

PUR and backfill casting systems are suitable above all for inexpensive solutions for production equipment by mass casting or ballfill casting.

Typical advantages of EP resins are their good resistance to mechanical, chemical or thermal influence and easy processing due to low shrinkage and low moisture sensitivity.

Filled epoxy casting resins with high heat resistance

The transparent EP systems offers high transparency and are mainly used for glass clear embedding, coating of decorative arts and transparent parts.

The advanced fastcast resins are intended specifically for mass production inseveral sectors of industry. They are characterized by technical properties superior to traditional fastcast like impact or abrasion resistance.
This product family is set to grow over the next few years.