Unfilled FastCast Resins

• quick setting system
• low viscosity
• good temperature resistance after heat curing
• easy-to-use mix ratio (1:1 by weight)
• adjustable filler content

Application fields:

• Negatives, molds, masters and mock-ups using the unfilled product or filled with RZ 30150 mineral filler in order to avoid an exothermic reaction and to get easy machining
• Thermoforming masters using the product filled with RZ 209/6 aluminium powder in order to increase thermal conductivity
  

• beige
• both components unfilled
• several hardeners
• short demoulding time
• low shrinkage

Application fields:

• Making of detailed models and mouldings for foundries

• beige
• very low viscosity
• very short demoulding time
• low shrinkage

Application fields:

• Making of detailed models and mouldings for foundries

• quick setting system
• reduced viscosity
• impact resistant
• low shrinkage
• adequate viscosity even with high rate of filler

Application fields:

• Negatives, molds, masters, mock-ups and decorative parts using the unfilled product or filled with RZ 30150 mineral filler in order to avoid an exothermic reaction and to get easy machining
• Thermoforming masters using the product filled with RZ 209/6 aluminum powder in order to increase thermal conductivity
  

• very low shrinkage
• low viscosity even filled
• easy to use mix ratio (1:1 by weight)
• high filler content possible

Application fields:

• Negatives, moulds masters and mock-ups using the unfilled product or filled with RZ 30150 mineral filler in order to limit exothermal reaction and to get easy machining
• Thermoforming tools using the product filled with RZ 209/6 aluminum powder in order to increase its thermal conductivity