Product Description

  • filled
  • can be casted in thick sections
  • pressure resistant - but workable
  • high heat resistance after post curing

Characteristics and Advantages

  • good flowability and long potlife
  • with hardener Biresin® G36 up to 100 mm in open moulds, with hardener Biresin® L74 up to 40 mm casting thickness
  • with hardener Biresin® P7 noticeable shorter potlife and faster curing
  • only low shrinkage
  • good mechanical properties after post curing, at elevated temperatures too
  • cured mouldings mechanically workable


  • Manufacture of heat resistant moulds and tools as well as backfillings of foundry patterns
  • With hardener Biresin® G36 or Biresin® P7 casting of heat resistant moulds, e. g. vacuumforming moulds
  • With hardener Biresin® L74 for manufacture of injection moulds for prototypes and small series




Biresin® G36 resin (A): 20 kg; 5 kg net
Biresin® G36 hardener (B): 2 kg; 0.5 kg net
Biresin® CH 170-3 hardener (B): 180 kg; 16 kg; 1.7 kg netto
Biresin® P7 hardener (B): 2.4 kg; 0.5 kg net